Home » Archives for Agustus 2014

Tutorial Redmi 1S (WCDMA) Cara Simpan data dari Internal ke External menggunakan XExtorage (Redmi 1S (WCDMA)

Posted by Unknown Minggu, 31 Agustus 2014 0 comments

Tools, Tips & Tutorial] Redmi 1S (WCDMA): tutorial ini bertujuan menyimpan data dari internal storage Anda ke external menggunakan XExtStorage
Sumber:
en.miui.com/thread-23243-1-1.html
Posting ini telah diedit oleh WTiyaworanan Juni-04-2014

Hi all,
Setelah beberapa minggu memakai xiaomi 1s, baru saya sadari bila ternyata saat kita melakukan foto,download data game dsb,itu semua tdk tersimpan di memory external/sdcard. Sampai akhirnya saya temukan tutorial ini.
Saya coba translate ke dalam bhs. Indonesia untuk memudahkan memahami.
Langsung saja:

Persyaratan:
1. Pastikan HH/Xiaomi S agan dalam keadaan Root.(ada di doc untuk tutorial Root xiaomi 1S)
2. Download WSM Manager: dengan versi 2.3.4 link download: via Dropbox WSM Manajer 2.3.4.apk (1.42 MB)
3.XExtStorage WSM Modul: dengan versi 1.2
Link download:
Download (Tidak perlu memahami bahasanya tinggal klik link downloadnya saja)
WSM_XExtStorage_1.2.apk

Jika semua bahan sudah siap. Lanjutkan langkah langkah berikut:
1. Izinkan Akses Root dari Securities -> Permission
2. Instal WSM mamanger, setelah terinstal,buka WSM apk, untuk
menginstal app.process dan Xposed, (disini akan meminta persetujuan Root Access)kemudian klik instal.stelah proses instal selesai, reboot HH agan.
3.Setelah reboot, pastkan SDcard ada di dalam telepon, salin
semua folder dalam penyimpanan / Android / data yang diinternal storage dan paste di SDCard / Android / data (jika folder di kartu SD tidak ada, agan bs membuat folder Android dan dengan data folder di sdcard.
4. Langkah slanjutnya Instal XExtStorage, setelah selesaik menginstal, jangan jalankan
XExtStorage dulu, tp jalankan WSM Tools, dan klik tombol
Modul XExtStorage,untuk mengaktifkan, lakukan reboot lagi.
5. Setelah Reboot, jalankan XExtStorage untuk mengkonfirmasi bahwa
sdcard1 sekarang primer dan sekunder sdcard0. Selesai gan....
6. Lakukan tes,bs agan lkukan dengan mengambil gambar dengan kamera dan lihat di explorer apakah foto sudah tersimpan di folder DCIM SDcard atau masih di DCIM folder di Storage internal.
Semoga tutorial ini akan membantu agan2 untuk menyimpan beberapa data game/foto yg sudah memenuhi internal storage.
Saya sudah coba dan berhasil , dan mendapatii kenikmatan lebih dalam menggunaan HH baru saya ini. DWYOR.....

[Tips & Trik] Cara Mudah Root dan Unroot Xiaomi Redmi 1S

Posted by Unknown 0 comments



Summary:
This simple step-by-step guide is about activating the native (= built-in) root on Redmi 1S. This is achieved by flashing a zip file via recovery so that the su binary file gets installed, proper permissions are set and the MIUI stable version number NN.0 is appended to NN.0.1 so that the firmware behaves like a developer version and unlocks the stock root. Root can then be turned on like for developer versions with Security -> Permission -> Root permission.

This approach does NOT rely on a program like VRoot.exe running on your Windows computer (from which you never can be sure what else it could be doing); only one zip file is installed via the built-in recovery of Redmi 1S.

Furthermore I provide another file for unrooting again. This file reverts all the changes done by the other script. Of course it only works if you were rooted with the first approach; if you have used SuperSU or similar apps it probably won't work.


Prerequisites:
Redmi 1S with stable MIUI ROM
Developer options activated (in Settings -> About phone tap 5 times on Android version)
Stock MI-Recovery 2.0.1
update.zip file (attached) Download update.zip (1.27 MB, Downloads: 5671)
UnRootNative_Redmi1S.zip (attached) Download UnRootNative_Redmi1S.zip (1.26 MB, Downloads: 2478)


A. Steps for rooting:
Download the file update.zip to your PC (because download via browser on phone often is not working properly)
Connect your Redmi 1S via USB
Copy the file update.zip to the folder 'Computer\HM 1S\Internal storage' (root of internal storage, meaning the top most folder)
Disconnect your Redmi 1S properly from USB (use 'Safely Remove Hardware and Eject Media' from USB icon in Windows SysTray)
Boot into Mi-Recovery (for this launch the Updater app, press the menu/options button and from the menu choose 'Reboot to recovery mode')
In the Mi-recovery select and confirm 'English' (or Chinese if you are capable to understand)
Select and confirm 'Install update.zip to System', this will take one second
Select and confirm 'Reboot'
After reboot go to Security -> Permission and activate Root permission
Enjoy your rooted Redmi 1S
 

 



B. Steps for unrooting:
Go to Security -> Permission and deactivate Root permission
Download the file UnRootNative_Redmi1S.zip to your PC (because download via browser on phone often is not working properly)
Connect your Redmi 1S via USB
Rename the file to update.zip and copy it to the folder 'Computer\HM 1S\Internal storage' (root of internal storage)
Disconnect your Redmi 1S properly (use 'Safely Remove Hardware and Eject Media' from USB icon in Windows SysTray)
Boot into Mi-Recovery (for this launch the Updater app, press the menu/options button and from the menu choose 'Reboot to recovery mode')
In the Mi-recovery select and confirm 'English' (or Chinese if you are capable to understand)
Select and confirm 'Install update.zip to System', this will take one second
Select and confirm 'Reboot'
Enjoy your unrooted Redmi 1S (MIUI version is back to xx.0, permission cannot be


 

  

Caution:
This is a safe process, but I am not responsible for anything bad that happens to your phone
After installing root with this approach the system will not be notified about OTA updates
But you can upgrade the firmware either by unrooting or by flashing the stable version again without wipe, after this the root is gone and you can updgrade to new firmware and most probably execute the root steps from above again


Credits:
This guide was originally based on the procedure for Mi3 from @Helgo9 but was adapted by me for Redmi 1S. It had been successfully tested on Redmi 1S WCDMA by @imranz with JHCCNBD23.0 and by @matthi with JHCCNBD24.0, furthermore by @adinovic on Redmi 1S CDMA with JHCCNBD23.0.
For the latest stable ROM JHCMIBE29.0 I adapted the rooting approach and it got successfully tested by @rocco6 on Redmi 1S WCDMA.
The unrooting approach was tested by @arendus on Redmi 1S WCDMA and he also provided the screenshots.
Finally many thanks go to @sta-s2z for answering my beginner's questions when I started this for the first time.

Root Xiaomi Hongmi 1SW

Posted by Unknown 0 comments


This simple step-by-step guide is based on the procedure for Mi3 from @Helgo9 but of course adapted for Redmi 1S. It has been successfully tested on Redmi 1S WCDMA by @imranz with JHCCNBD23.0 and by @matthi with JHCCNBD24.0, furthermore by @adinovic on Redmi 1S CDMA with JHCCNBD23.0. Many thanks go to @sta-s2z.

Prerequisites:

Redmi 1S with stable MIUI ROM
Stock MI-Recovery 2.0.1
update.zip file (attached)
update.zip (1.26 MB)

Summary:
By flashing the attached zip file via recovery the already existing su binary gets the proper permissions and the MIUI version number x.0 is appended to x.0.1 so that the firmware behaves like a developer version and unlocks the stock root.

Root can then be turned on in Security app -> Permissions -> Root permission.

Steps:

Download the file update.zip to your PC (because download via browser on phone often is not working properly)
Connect your Redmi 1S via USB
Copy the file update.zip to the folder ‘Computer\HM 1S\Internal storage’ (root of internal storage)
Disconnect your Redmi 1S properly (‘Safely remove hardware…’)
Boot into Mi-Recovery
Select and confirm ‘English‘ (or Chinese if you are capable to understand)
Select and confirm ‘Install update.zip to System‘, this will take one second
Select and confirm ‘Reboot’
After reboot go to Security app -> Permissions and activate Root permission
Enjoy your rooted Redmi 1S
Caution:

This is a safe process, but I am not responsible for anything bad that happens to your phone
After receiving ROOT the system cannot be upgraded by OTA
But you can upgrade the firmware by flashing the stable version again without wipe, after this the root is gone and you can updgrade to new firmware and most probably execute the root steps from above again
Credits to AndroidFuchs from en.miui.com

BBM Mod FB Ui Dark Red Versi 2.3.0.14

Posted by Unknown 0 comments


Sekarang lagi banyak yang suka BBM MOD.. buat kalian yang suka edit BBM. nih BBM hasil edit untuk di edit . . . jika ingin tau fitur BBM ini, silahkan langsung coba install. ane hanya share . . .

Download :
BBM Mod FB Ui Dark Red Versi 2.3.0.14
Jika kurang Puas dengan BBM di atas, silahkan edit sendiri :P

MTK6250 Bluetooth 1.54" LCD Watch Firmware installation. How to flash firmware on RKM M3, Podoor MI W2 or PW305 watches

Posted by playerxda2 0 comments

This is a simple tutorial on how to flash firmware on RKM M3, Podoor MI W2 or PW305 Linux watches.

1. First, you'll have to download the firmware archive 'MTK6250 Bluetooth 1.54 LCD Watch firmware' from here, here or here.
2. Install driver for the smart watch. Extract the archive and search 'USB_Driver_exe_v1.1032.1' driver. Run 'InstallDriver.exe' as Admin and install the drivers. I have Windows 8.1 Pro x64 and it worked with no problem at all.
3. Open “download” folder, double click “MultiPortFlashDownloadProject, click up and left corner 'File---Open Download Agent File', select 'download folder----MTK_AllInOne_DA.bin', and then click “open”. Next you have to choose the firmware version which you want to flash (between W2-MI_TR_V2_5 and V2_7_podoor), click 'Image Folder' and then go to where you store the firmware. After finishing above steps, click 'Start All' (down and right corner), power off your watch, and then connect watch to computer via USB data cable. During burning time, the data will keep updating, it is normal, don’t worry. (red line, yellow line, blue line and finally the green line). When green color line is displayed it means that the flashing was successful.
4. Next operation is needed once upgrade successfully，
Go to Dialer option (i.e. dial phone number), input *20# （long press digit 7 to input *,long press 9 to input #）. Click Device --> Click Set UART --> Click UART setting --> In the first line of the USB port 2, click the right arrow keys, showed none, then click on the upper right corner the three point(stands for save settings), watch will shut down after 3 seconds. Boot again can be used normally.
5. Install the provided 'SmartWatch2_20.apk' on the Android devices you want to pair with your smart watch.

For more details please watch the video below.

3G Mobile Data Connection works just great on Probox2 EX TV Box.

Posted by playerxda2 0 comments

3G Mobile Data Connection works just great on Probox2 EX TV Box. Tested with Huawei E3131 USB dongle. Just disable WiFi and Ethernet connections and plug in the 3G USB dongle. Wait a couple of minutes and you're done.

For more details please watch the video below.
 

How to easily flash firmware on Probox2 EX Media Player with Amlogic S802-H CPU

Posted by playerxda2 0 comments

This is a simple tutorial on how to easily flash firmware on Probox2 EX Media Player with Amlogic S802-H CPU.

1. First, download the stock firmware from Probox2 website probox2.com or from here, here or here. (PROBOX2-EX-20140805 firmware version).
2. Download AMLogic USB Burning Tool v2.0.0.140306_Alpha. It's working also on Windows 8.1 64 bit (my PC OS), but you'll have to disable driver signature enforcement. Then you have to put Probox2 EX Media Player in flash mode. To do that, prepare a thin metal stick / paper clip, then press and hold the restore button (inside the AV port hole) and press Power button at the same time. After 3-5 seconds USB_Burning_Tool will detect the USB device. (with the DC and OTG USB cable  plugged in). Install AMLogic USB Burning Tool v2.0.0.140306_Alpha and the drivers.
3. Launch USB_Burning_Tool, change the language to English. Click 'File' and choose 'Import image', choose the .img file you just download. Click "Start" to start firmware upgrade, it should take around 3-4 mins and please do NOT power off / unplug PROBOX2 EX during firmware upgrade. After finished firmware upgrade, it will auto disconnected. Now you can unplug it and connect to TV again.

For more details please watch the video below.



How to easily install Adobe Flash Player on Probox2 EX TV Box running Android KitKat

Posted by playerxda2 0 comments

This is very simple indeed. Just read this article and follow the instructions from the below video.
Enjoy!

Probox2 EX Extreme Media Player unboxing & first impressions

Posted by playerxda2 Sabtu, 30 Agustus 2014 0 comments

I just received this extraordinary Android TV Box & Extreme Media Player, so this article is not a full review, this is just an unboxing and I'll share with you my first impression on this amazing device.
Probox2 EX is a very powerfull Android Mini PC with a Amlogic S802-H processor, 2 GB of RAM and 16 GB of eMMC storage. This device is using the same hardware as Minix Neo X8-H, but it comes in a more complete configuration, it has dual band Wi-Fi and hardware DTS and Dolby audio decoding. It also has a gamepad with integrated sound and it claim to be the best Android Mini PC available on the market in the present. Probox2 EX Extreme Media Player costs only 149 dollars with free shipping. It is offered as a gift a nice Remote+ (worths $32).


The Probox2 EX Extreme Media Player package includes:
- Probox2 EX Extreme Media Player
- Probox2 Remote+
- IR Remote controller
- HDMI cable
- USB cable
- AV Cable
- DC Adapter
- user manual.


Probox2 EX Specifications
CPU: Amlogic S802-H Quad Core Cortex A9 CPU, up to 2Ghz
GPU: Octo Core Mali-450 GPU, up to 600Mhz
Memory / Storage: 2GB DDR3 / 16GB eMMC
Wireless Connectivity: 802.11n Dual Band WIFI (2.4Ghz / 5.8Ghz), Bluetooth 4.0
OS: Android KitKat 4.4
Video Output: HDMI 1.4b, up to 4K** @ 30fps, Support HDMI-CEC
Audio Output: Via HDMI 1.4b, optical SPDIF
Power: DC 5V 2A adapter (CE, FCC, CCC Certified)
Peripheral Interface: RJ-45 Ethernet Port (10/100Mbps), USB 2.0 Port x 2, OTG Port, TF Card Reader, AV Port, IR Sensor (Remote included)
Dimensions / Weight: 115mm * 115mm * 26mm / 200g

First Boot & First Impressions
The set-up of the media player is very simple, just connect the HDMI cable, WiFi or an Ethernet cable, the Wi-Fi antenna, the RF dongle for Remote+, the power adapter to Probox2 EX and you're done. Now pressi the power button on the box and it will boot very quickly.
The User Interface is awesome, it has big tiles like Metro / Modern UI of Windows 8 / Windows 8.1. This is very useful for the smaller display TVs.
The interface is very intuitive and friendly, and soon you'll get used to it. 
The remotes work just fine out of the box (you will have to put the batteries) and the OS moves very fluid and fast.


In Antutu X Benchmark this great device scores an amazing 37.245 points; so
this is definitely my new favorite tv box.



Probox2 EX Extreme Media Player vs RKM MK902 TV Box
 

BBM Mod BIG DP Ui (BBM Full Display Picture)

Posted by Unknown 0 comments

Jika sebelumnya sudah ada BBM mod versi FB/Twitter UI . Kali ini ada BBM modifikasi dengan tampilan DP Besar (Full) seperti yang di screenshoot di atas.

Link Download : DISINI

Credit: Thx to Trangga Ken

Download latest stock firmware for Beelink M8B TV Box

Posted by playerxda2 Kamis, 28 Agustus 2014 0 comments


Download latest stock firmware for Beelink M8B TV Box from here or here.

Firmware： M8B_108k4_beelink
Model： Beelink M8B TV Box
Image file size: 361 MB  
Platform: AMLogic S802B

Download latest stock firmware for Mele A1000G TV Box

Posted by playerxda2 0 comments


Download latest stock firmware for Mele A1000G TV Box from here or here.

Firmware： A1000G Quad V3.1.7_SD Card
Model： Mele A1000G TV Box 

Image file size: 334 MB 
Platform: Allwinner A31
FW version: 3.1.7
Style: A1000G_HW_SDK12

Download DragonFace latest version v.2.2.0

Posted by playerxda2 0 comments



Dragonface is a very intuitive piece of software that will let you edit and modify A10, A13 and A31 firmware images. You can quickly change your boot logo or animation; of course, you can do much more,  pull, push and edit Init.rc or Script.fex,  remove and add APK's, change basic info.


Download DragonFace v.2.2.0 from here, here or here.
You can find the previous versions here.

Tutor Injek Moto G CDMA (verizon/boost)

Posted by Unknown 0 comments
Berikut adalah beberapa langkah mudah untuk menginject  Moto G ini.

Bahan2 bisa dilihat di doc ini DISINI

Bahan tutor step by step di slideshare Disini

via OTA (Over The Air) ke Galery Smartfren. ==> Khusus Verizon, buat yang Boost bisa dilakukan dengan merubah firmware ke Verizon

1. Download dan instal SPCUtility.apk disini Download lalu read dan catat di notes supaya gak lupa
2. Pairing OTA Nomer SF dgn input SPC yang sudah di read, disarankan gak rubah SPC supaya kalo nantinya reset atau update OTA gak repot lagi
3. Dial *228# lalu ikuti suara petunjuk, tekan angka 1 untuk pilih bahasa Indonesia lalu ikuti sampai dengan selesai programming OTA-nya
4. Dial *123*33 untuk aktifkan EVDO, sama seperti halnya iPhone 4/4S verizon, 3G on data bisa digunakan.
5. Done. Call, SMS, Data normal.
Sumber : http://gadnes.com/tutorial-inject-moto-g-verizon-dan-boost-mobile/


Via Manual (pakai DFS)
langsung aja ke TKP Injek CDMA Kaskus : http://www.kaskus.co.id/show_post/5372da88c3cb176d7b8b4874/3384/-

Buat yang data evdo tetep gak keluar (call dan sms bisa) harus edit manual parameter data lewat DFS dan ubah nv dump, sumber kaskus: http://www.kaskus.co.id/show_post/5367c5cda807e72a488b46a0/3333/-


Semoga Dokumen ini bisa membantu agan2 yang baru dapet Moto G CDMA.

Cara Rooting Moto G dan Unlock BL

Posted by Unknown 0 comments
UNLOCK BOOTLOADER (akan menghapus semua data di HP, jadi simpan dulu file2 penting agan2)
1. download adb driver di DOWNLOAD DISINI dan ekstrak zip nya.
2. install motorola driver dari LINK
3. aktifkan usb debugging di Moto G
4. buka folder hasil ekstrak zip tadi, trus klik "runme read-data UBL" lalu matikan HH, tahan tombol vol bawah dan colokkan kabel micro usb. nanti terbaca kode unlock nya.
5. copy hasil data tadi dan paste di word, lalu hilangkan semua spasi yang ada. trus copy hasil word tadi
6. buka LINK INI
7. copas hasil word tadi pada kolom 6 lalu klik can my device be unlocked, kalo bisa nanti kita dapat email balasan dari motorola.
8. buka lokasi folder hasil ekstrak zip tadi, trus tekan shift+klik kanan pada folder"root via CMD" pilih run command windows from here. lalu ketik:  fastboot oem unlock xxxxxxx
xxxxx = (kode dari email motorola)

ROOTING
1. download update superSu dari DARI SINI
2. copy Update-superSU.zip ke HH
3. buka folder CMD hasil ekstrak zip unlockBL, trus klik "runme cwm-recovery" lalu matikan HH, tahan tombol vol bawah dan colokkan kabel micro usb.
4. Setelah sukses, pilih recovery dengan menekan tombol vol bawah sampai tulisan recovery, trus tekan tombol vol atas, nanti masuk cwm recovery touch.
5. di cwm pilih install zip-choose from sdcard-0-lalu cari update-SuperSU.zip tadi
6. setelah sukses tinggal reboot system now

NB. Resiko ditanggung penumpang, jangan takut untuk mencoba .... ntar jadi ketagihan lho

Cara Mengubah Moto G Menjadi GPE

Posted by Unknown 0 comments
Syarat :
Unlock Bootloader
Bahan :
GPE ROM | Google Drive : Download | Mediafire : Download
Motorola Developer Tools : Download
Motorola Device Manager : Download
Langkah :
Extract Motorola Developer Tools, Extract Juga GPE ROM dan masukkan kedalam folder Motorola Developer Tools
Matikan Moto G dan masuk ke Bootloader
Colokan USB dan hubungkan ke Laptop atau PC. Sehingga muncul tulisan 'USB Connected di Moto G'
Buka CDM di folder Motorola Developer Tools. Caranya : Shift + Klik kanan > Open command window here
Jika sudah, copas perintah ini Satu Persatu.
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader

Tunggu Hingga Masuk Bootloader Ulang, Jika sudah. Copas lagi :

mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg_intl.img
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot

8. Maka Moto G akan reboot sebagai GPE, Reboot mungkin membutuhkan waktu sedikit lama.

Tested : XT1033, Dual SIM Menjadi Single.

Sumber : http://forum.xda-developers.com/showthread.php?t=2726041

Cara Mudah Install Custom Recovery Moto G

Posted by Unknown 0 comments
Syarat : Unlock Bootloder + Bahan

Tambahan (Pilih Salah Satu) :
CWM : Link (Pilih yang Img)
TWRP : Download

Download CWM/TWRP
Rename menjadi cwm.img atau twrp.img (Ga usah di rename juga gpp, biar mudah aja)
Masukkan ke folder bahan UBL (fastboot & saudaranya)
Buka cmd (Shift + klik kanan > open window command here)
Matikan Moto G, dan masuk ke Bootloader.
Ketikkan fastboot flash recovery twrp.img atau cwm.img
Enter

Flash Stock ROM Moto G Kitkat [XT1033] Asia

Posted by Unknown 0 comments
Download :
Firmware XT1033 [Kitkat 4.4.2] : Download | Download | Download (Torrent : Download vis Torrent)
mfastboot-v2 : Download
Motorola Device Drivers : Download
Retail Lock : Download
Retail Unlock : Download

Tutorial :
Install Motorola Device Drivers
Extract mfastboot-v2
Extract Juga Firmware XT1033 [Kitkat 4.4.2] kedalam folder mfastboot-v2
Matikan Moto G
Reboot the phone into Bootloader (Colokkan USB dari PC ke HH sambil tahan tombol volume down)
Buka CMD dari folder tempat extract Firmware XT1033 [Kitkat 4.4.2] & mfastboot-v2 tadi, caranya tahan shift+klik kanan.
Copas command berikut, satu persatu. Kemudian klik enter.

mfastboot.exe oem lock begin

mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata

mfastboot.exe oem lock

mfastboot.exe reboot

8. Selesai

*Akan men-Lock Bootloader, kaLau ingin Bootloader nya ke Unlock. Tinggal Command mfastboot.exe oem lock begin & mfastboot.exe oem lock

*Biar mudah tidak capek-capek copas command satu persatu, Download ini :
Retail Lock : Download (Untuk ingin bootloader nya ke Lock)
Retail Unlock : Download (Untuk ingin bootloader nya tetap ke Unlock)
Extract ke tempat foldermfastboot-v2 tadi, tingal jalankan file-nya. Maka otomatis, semua comman akan terbaca.

Credit : Maman Mann

Download Jelly Bean Stock Firmware for Jiake JK13 smartphone

Posted by playerxda2 0 comments



Download Jelly Bean Stock Firmware for Jiake JK13 smartphone from here or here.

Archive name: JIAKE JK13 MTK6572-169699 20140320.rar
Archive file size: 216 MB
Support: Mediatek MT6572
Project:  yuanda72_wet_a_jb3
Config_version: V1.1.1


Bbm Mod Wood Theme FB UI Versi 2.3.0.14

Posted by Unknown Rabu, 27 Agustus 2014 0 comments


Download BBM Wood Versi terbaru dengan feature FB UI.
Link Download

Cara Instalasi:
Download Apk
setelah selesai tinggal Instal seperti biasa.
Done.

Credit thx to Arigatou Rizky Rivaldy Group BBM For Android Indonesia

Karbonn A3 Plus Pattern Unlock or Flash done 100% Tested by me

Posted by Unknown Selasa, 26 Agustus 2014 0 comments

Karbonn A3 Plus Pattern Unlock or Flash done 100% Tested by me

:: Model ::
 

 :: Firmware or Tools ::


:: Procedure ::

* Must your mobile battery 70% up charged

* Open Volcano box or go to Detect tab

* Select [D+/D-]SPD/Anyka

* Click on Detect button 

* Then find SPD driver  click on Set Pinout button

* Open Flash tool and select Flash file

* Click on Start download button like play button

* You are done :)

:: Pattern Unlock or Flash done Screen Shot ::


 




 

Karbonn A3 Plus Flash file Free Download HERE

Posted by Unknown 0 comments

Karbonn A3 Plus Flash file Free Download HERE

:: Model ::


:: Firmware or Tools ::




:: Related Post ::

Karbonn A3 Plus  Pattern Unlock done or Flash See here

Cara Membuat Andromax G2 Jadi GSM-GSM (Dual GSM)

Posted by Unknown 1 comment
PATCH DUAL GSM G2 4.3
Berikut tutorialnya:

Alat dan bahan:
1.HH sudah terinstall cwm..
2.File Patch.. Download disini

Tahapan tahapan:
1. pertama masuk CWM....caranya hh kondisi mati tekan dan tahan tombol Power+Vol up
2. di CWM pilih install zip from sdcard..trus pilih file hasil download tadi...
jika sudah terinstall matikan hh ganti kartu cdma dngan gsm...
3. setelah hidup tinggal ganti CDMA auto(prl) jadi GSM auto(prl)...gantinya boleh pake nova launcher, any cut,aon gsm dan sebagainya....

SELAMAT ANDA BISA GSM kembali..salam g2

Thx to: Agan Hadi Sopian
Sumber : Group Facebook Smartfen Andromax G2

Update ROM Kitkat 4.4 di Andromax C2 GSM-GSM

Posted by Unknown 0 comments
Bagi yang minat untuk upgrade Andromax C2 dari Jellybean 4.3.xx  ke Kitkat 4.4.xx silahkan di coba tutorial ini

Feature:
-Unlocked radio( Bisa dual gsm/ GSM-GSM)
-Via radio info set ke gsm auto,
-So far still no bug,


Download Bahan di bawah ini (Pilih salah satu LINK saja)
Download via Paidu (Website Cina)

Mirror :
Google drive
atau
Mediafire


Cara Pakai :
– Ekstrak File di direktori akar microSD (jangan di dalam folder)
– Matikan HH
– Dalam kondisi mati tekan tombol power, Volume + & Volume – berbarengan
– HH kemudian melakukan Flashing TF Update, tunggu sekitar 10 Menit
– Stelah selesai Hold tombol Power
– Selesai

Source: Group Facebook "Smartfren Andromax C2"

Custom ROM MIUI v5 Jelly Bean 4.3 For Andromax C2

Posted by Unknown 0 comments
ROM MIUI sekarang sudah dapat kamu install di Andromax C2 kamu, tapi jangan berharap terlalu banyak di custom rom ini sebab rom ini masih ada bug yang berhubungan dengan storage. ROM ini bisa switch akses internet gsm tapi cuma EDGE.
Perhatian
- Pastikan di Andromax C2 kamu sudah terinstall custom recovery seperti Philz CWM/TWRP
- Segala akibat yang ditimbulkan dari ROM ini bukan tanggung jawab kami.
- Sebaiknya backup ROM asli via Philz CWM kamu sebelum install custom rom ini.
- Untuk para gamer tidak cocok menggunakan rom ini

MIUI-andromaxc2

SS :
1 . SS 1
2 . SS 2
3 . SS 3
4 . SS 4

MIUI-andromaxc2-3

Kekurangan
- Tidak bisa akses USB Storage (tapi bisa gunakan via mtp)
- Sinyal kayanya kurang kuat
- Data game seperti obb masuk ke internal memory (solusi gunakan foldermount)
Cara Install
- Download file  custom rom MIUI v5 :direct LINK atau Mediafire   kemudian taruh di sdcard.
- Masuk ke menu CWM
- Lakukan Wipe Data/Factory Reset
- Lakukan Wipe Cache Partition
- Install ROM
- Tunggu sampai completed dan Reboot System Now


Sekali lagi kami sangat berharap apabila para pengguna ROM ini bisa membantu beberapa masalah di ROM ini.
Kredit:
Thanks to agan  Alhadi S'mbilan Belas dari Kaskus lounge Andromax C2 buat stock rom deodex andromax C2

Cara Main Game HD Lancar di Andromax C2

Posted by Unknown 0 comments
Bahan-bahan:


1. Init.d :
Download


2. Pure HD Graphic: graphic menjadi HD
 Download

3.Busy Box dan zram setting: untuk mengurangi FC instal busy box, lalu instal zram setting, buka zram  geser layar ke kanan>RGN>Very agresive *
Busy Box: Download
Zram setting: Download


4. Super charger V6 instal via Script Managermasuk  Scipt Manager, cari Super charger yg di instal tadi, pilih SU>RUN settingnya 1(fast) > 2(setting agresive) 16(reboot)
Super charger v6: Download
Script Manager: Download


5.Grenify: hibernasi aplikasi yg tidak sedang dijalankan Download


6. Xbooster:
Download

7.Universal init: untuk mengaktifkan init.d Download

8. Ram Manager Pro: Download

Download stock firmware for EKB328 TV Box with RK3288 SoC

Posted by playerxda2 0 comments

Download stock firmware for EKB328 TV Box with RK3288 SoC from here, here or here. More details about EKB328 TV Box you will find here.


Firmware： update_EKB328_8.25  
Model： EKB328 TV Box  
Image file size: 307 MB 
Platform: RK3288

Download latest stock firmware for Onda V989 Octa Core Tablet

Posted by playerxda2 0 comments



Download latest stock firmware for Onda V989 Octa Core Tablet from here or from here. You can root it with this tool.

 
Firmware： V989 Core8_v2.0_v4
Model： Onda V989 Octa Core Tablet
Image file size: 451 MB
Platform: A31s


Onda V989 Octa Core Tablet Specs
CPU: A31s Quad Core
GPU: Power VR SGX544
RAM     1GB,DDR3
Storage  16GB
Screen: G+G Capacitive Touchscreen, 1024*768 High-resolution Screen
Size:   9.7 inch
Display:  HD TFT Screen
Resolution:    1024*768 Pixels
Visible Angle: 178°
Dual Camera     Front camera, 2.0 Megapixels  Back camera, 2.0 Megapixels
 

Karbonn A19 Flash done 100% Tested Soltuion

Posted by Unknown 0 comments

Karbonn A19 Flash done 100% Tested Soltuion

:: Model ::



:: Firmware or Tools ::


:: Procedure ::

* Open Flash tools click on Scatter button and select Scatter file in firmware folder

* Click on Download button

* Must your mobile battery charged 70% up

* Press and hold Vol. Up key and insert usb cable

* You are done

:: Flash Success Screen Shot ::



Karbonn A19 Firmware or Tools Free Download HERE

Posted by Unknown 0 comments

Karbonn A19 Firmware or Tools Free Download HERE

:: Model ::


:: Firmware or Tool ::


 
:: Related Topic ::

Karbonn A19 Success Flash done see HERE

Intex Cloud Y5 Flash done with volcano box 100% tested

Posted by Unknown 0 comments
Intex Y5 Flash done with volcano box 100% tested

Intex Y5 Model Image:

About This Tutorial:

This tutorial tested by me in Intex Cloud Y5 and this tutorial in that use Volcano tool because must need to flash boot driver and i try to boot from mobile but not detected boot driver in mobile from any key so Volcano tool is the use below are totally giving information how to connect Intex Cloud Y5 in the volcano box, how to flash Intex Cloud Y5 after connect volcano then flash in tool, and also here benefit  you do not need a battery for your mobile phone to flash because it is to be connect with volcano box it is simple if you better understand this tutorial let's go how to flash Intex Cloud Y5 with volcano box.

Download Area
Intex Cloud Y5 Firmware or Tools Download

Procedure

1. Open volcano box and go to tab " Detect "
2. Select [D+/D-]SPD/Anyka
3. Click on Detect button
4. When complete driver search
5. Click on Set Pinout
6. Open Flash tools
7. Select file and click on firmware start button like play button
8. You are done

Success Flash Screen Shot


  • Modem Downloading check below image tutorial


  • System Downloading check below image


  • If your mobile will be flash done then you can see like below image tutorial

  • Now Click on Stop button and disconnect your device
  • Then insert battery and start your mobile
  • You are done

How to Root Using Android 4.4.2 KitKat Firmware On Samsung Galaxy S5 (All Models) Guide

Posted by Unknown 0 comments

Announced in February 2014, Samsung Galaxy S5 is now available for purchase in several countries around the world. The Galaxy S5 comes in some variants and runs Android 4.4.2 KitKat out of the box.
Samsung Galaxy S5 users who wish to root their devices, may follow the tutorial below.
This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. Head over to the CF-Auto-Root main thread to learn more about the root method.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S5 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Galaxy S5. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S5 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root
2. Odin 3.09

Steps to Root Galaxy S5 Running on Android 4.4.2 KitKat Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy S5. Then boot into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S5 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the AP button and select the CF-Auto-Root .tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy S5 running on Android 4.4.2 KitKat is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Download BBM Android Standalone Dark Versi v2.3.0.14

Posted by Unknown Senin, 25 Agustus 2014 0 comments

Bagi yang ingin icip icip BBM for Android FB & Twitter ui tapi yang versi Clone atau stand alone versi terbaru. Berikut ane share file Instalernya hasil karya dari teman2 team group BBM For Android Indonesia . Langsung saja silahkan DOWNLOAD filenya DISINI

EZCast for Windows PC reaches version 1.1.0.79

Posted by playerxda2 0 comments



What's new in Windows PC EZCast v.1.1.0.79 version (2014-08-07)
1. add web, cloud video, live tv functions.
2. Add comment function. 




Here you can download the previous versions pack.
Tronsmart T1000 is an amazing Mirror2TV dongle.

Copyright © 2012 koleksiromandroid. All rights reserved.

PSG created by XDA Team | Published by playstore google