Download latest stock firmware V3.1.8 for Mele A1000G TV Box



Download latest stock firmware V3.1.8 for Mele A1000G TV Box from here or here. Download previous version V3.1.7 from here.

Firmware: MeLE A1000G Quad_V3.1.8_SD Card
Model: Mele A1000G TV Box 
Image file size: 351 MB  
Image file name: A1000G_SDK12_DDR2G_V3.1.8_20140928.img
Platform: Allwinner A31
FW version: 3.1.8
Style: A1000G_HW_SDK12
Build number: mars_a1000ghw-eng 4.2.2 JDQ39 20140928 test-keys

Doogee Turbo 2 DG900, a new tiger in town




Doogee Turbo2 DG900 is an Android 4.4 3G Phablet with 5.0 inch FHD screen, 13 MP rear, 8.0MP front camera, MTK6592 1.7GHz Octa core processor with 2GB RAM and 16GB ROM.

Turbo2 DG900 is a feature-stuffed phablet with powerful specifications, stylish design, powerful display and high speed, provided at very reasonable cost that you can afford to buy this awesome phablet. The phone is unlocked for worldwide use. So, wherever in the world are you, you can order it without getting worried about if the phablet will work in your country or not. 

Doogee DG900 highlights
Corning Gorilla glass 3 screen
5 inch high resolution display FHD 1920*1080 LCD with 441 ppi
2GB RAM + 16GB ROM
Rear touch panel  
CPU:  MTK6592 Cortex-A7 Octa core 1.7GHz
OS: Android 4.4 


 Doogee DG900 specifications
Band: 2G: 850/900/1800/1900
         3G: WCDMA 850/2100MHz
OS: Android 4.4
CPU: MTK6592 Cortex-A7 Octa core, 1.7GHz
GPU: Mali-450
ROM: 16GB
RAM: 2GB
Display Size: 5 Inch Corning Gorilla glass3
Resolution: 1920*1080 pixels
Screen Color: 16000K Colors
Card Extend:Support TF card up to 64GB extended
Camera/Picture Resolution: Dual Cameras, 8.0MP front camera, 16.0MP back camera



You can now preorder Doogee Turebo 2 DG900 from:
- www.chinavasion.com
- www.everbuying.com
- comebuy.com
- efox-shop.com
- www.antelife.com
- www.pandawill.com

Samsung Grand 2 Dead Boot Repairing with SDC Image file without any box 100% tested

Samsung Grand 2 Dead Boot Repairing with SDC Image file without any box 100% tested

:: Model ::
http://s26.postimg.org/720u53khl/samsung_galaxy_grand_2_3.jpg

:: Procedure ::

* Download SDC Image Click HERE

* Write this SDC Image in 8GB Sd Card See Below picture 

http://s26.postimg.org/n1o32e5x5/G7102_SDC.png

* Must your Bettery 80 % charged, after Insert Sd card to phone and Press and Hold Volume Download + Home + Power Button

* Must Remeber this note in screen download may not shown on your phone screen.  but connect phone to pc and open device manager if there this drive like " Samsung Mobile USB CDC Composite Device " See below picture this is screen shot of Driver

http://s26.postimg.org/74pb5odix/G7102_USB_Port.png

* * After Open Odin version 3 there must detect the phone and you need to flash wih PIT and NH6 4.4.2 ROM See below picture for more know about that

http://s26.postimg.org/v9q0ndxtl/G7102_ODIN.png

* After Flash your phone reboot automatic see below picture

http://s26.postimg.org/x2sxbpj07/G7102_IMG.png

http://s26.postimg.org/8nkpank3b/G7102_IMG2.png

http://s26.postimg.org/5i03kg1h3/G7102_IMG3.png

* You are done :)

* No Need eMMC repair, No JTAG, No Soldering

* All are done via Sd card or ATF

Download Android Jelly Bean 4.2.2 stock firmware for Star Z1 smartphone




Download Android Jelly Bean 4.2.2 stock firmware for Star Z1 smartphone from here, here or here. Download stock firmware for Star Z2 from here.


Archive: Z1 20140731_e2109_v82_zlh_fwvga
Firmware: Android Jelly Bean 4.2.2
Model: Star Z1 FWVGA smartphone
Image file size: 342 MB
Platform: Mediatek MT6582
Project: e2109_v82_zlh_fwvga
Baseband: MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V11_P5_1_wg_n
Config_version: V1.1.1


Install firmware
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
   –> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on


Here you have a video tutorial on how to upgrade to KitKat another MT6592 CPU smartphone, E-ceros One.  

Download Android KitKat 4.4.2 stock firmware for RKM MK902II TV Box



Download Android KitKat 4.4.2 stock firmware for RKM MK902II TV Box from here, here or here


Archive: MK902 II_140904
Firmware: Android KitKat 4.4.2
Image file name: 902II_140904_FAQ.img
Model: RKM MK902II TV Box
Image file size: 360 MB
Platform: Rikomagic RK3288
Boot version: 2.15
FW version: 4.4.02

Video: How to flash latest v2.9 firmware on RKM M3, Podoor MI W2 or PW305 watches


This is a simple tutorial on how to flash firmware on RKM M3, Podoor MI W2 or PW305 Linux watches.

1. First, you'll have to download the firmware archive 'SmartWatch M3 Software(140905) - PW-V2_9' from here, here or here. You can also download previous version 2.7 from here.
2. Install driver for the smart watch. Extract the archive and search 'USB_Driver_exe_v1.1032.1' driver. Run 'InstallDriver.exe' as Admin and install the drivers. I have Windows 8.1 Pro x64 and it worked with no problem at all.
3. Open “download” folder, double click “MultiPortFlashDownloadProject, click up and left corner 'File---Open Download Agent File', select 'download folder----MTK_AllInOne_DA.bin', and then click “open”. Next you have to choose the firmware version which you want to flash (140905_M3_RKM), click 'Image Folder' and then go to where you store the firmware. After finishing above steps, click 'Start All' (down and right corner), power off your watch, and then connect watch to computer via USB data cable. During burning time, the data will keep updating, it is normal, don’t worry. (red line, yellow line, blue line and finally the green line). When green color line is displayed it means that the flashing was successful.
4. Install the provided 'SmartWatch.apk' on the Android devices you want to pair with your smart watch.

For more details please watch the video below.

Download Android Jelly Bean 4.2.2 stock firmware for Star Z2 smartphone




Download Android Jelly Bean 4.2.2 stock firmware for Star Z2 FWVGA smartphone from here, here or here. Download HD version firmware from here.


Archive: Z2 20140623_e2719_v92_zlh_fwvga
Firmware: Android Jelly Bean 4.2.2
Model: Star Z2 FWVGA smartphone
Image file size: 430 MB
Platform: Mediatek MT6592
Project: e2719_v92_zlh_fwvga
Baseband: MT6592_S00_MOLY_WR8_W1315_MD_WG_MP_V21_P1_1_wg_n
Config_version: V1.1.2


Install firmware
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
   –> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on

Here you have a video tutorial on how to upgrade to KitKat another MT6592 CPU smartphone, E-ceros One.  

Download Android Jelly Bean 4.2.2 stock firmware for HTM A6W smartphone




Download Android Jelly Bean 4.2.2 stock firmware for HTM A6W smartphone from here, here or here


Archive: Firmware for HTM A6W (13F43_S26W_A1.140423.JB3.V1.FWVGA.4P32_COM_EN)
Firmware: Android Jelly Bean 4.2.2
Model: HTM A6W smartphone
Image file size: 258 MB
Platform: Mediatek MT6572
Project: bird72_wet_a_jb3
Baseband: MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P7_1_wg_n
Config_version: V1.1.1

Download Android KitKat 4.4.2 stock firmware for Elephone P6I smartphone


Download Android KitKat 4.4.2 stock firmware for Elephone P6I smartphone from here, here or here


Archive: Elephone P6i (A788D_MB4_W_HWV1.1_32+8_V1.7.5_20140704_P6i)
Firmware: Android KitKat 4.4.2
Model: Elephone P6I smartphone
Image file size: 264 MB
Platform: Mediatek MT6582
Project: cenon82_wet_kk
Baseband: MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V37_1_wg_n
Config_version: V1.1.1

Download Mediatek SP Drivers v1.6


Download Mediatek SP Drivers v1.6 from here, here or here. (8,27 MB)



Version Description
V1.6 Modify USB VID/PID in tetherxp.inf
V1.5 Add new USB VID/PID for VIA pcmodem. The further detail, please see the sheet of Combination.
V1.4 Remove un-used files: adb.exe
V1.3 Add new USB VID/PID for CDC-ACM
V1.2 Remove un-used files: usb8023x.sys, rndismpx.sys, winusbcoinstaller.dll
V1.1 Update new USB VID/PID for ICS
V1.0 Windows RNDIS driver for Android Tethering
Installation:
   1. Please update Microsoft Hotfix KB959765 for windows XP;
   2. Then install RNDIS driver using tetherxp.inf.

Windows ACM COM port driver for Android
Installation:
   1. Please update Microsoft Hotfix KB943198 for windows XP;
   2. It is better to update your windows XP to SP3;
   3. Then install ACM driver using cdc-acm.inf.

Windows adb driver for Android
Installation:
  1. Install adb driver using android_winusb.inf.

Windows MTP driver for Android
Installation:
  1. install Windows media player 10 or above version
  2. Install MTP driver using wpdmtp.inf.

Cara Root Andromax i3s

Akhirnya setelah sekian lama, Smartfren Andromax i3s bisa juga dibobol (baca: di root). Walaupun masih harus menggunakan PC sebagai medianya, setidaknya, kita sudah bisa mengutak-atiknya. Cekibrooott bro!


Do With Your Own Risk!

Syarat: USB Debugging harus sudah aktif!



Bahan: Download Root Tools



Kalau bahan dan syaratnya sudah terpenuhi, mari ikuti tutor ini!

Extract file yang di download tadi di PC
Di folder hasil extract tadi, cari file “UPDATE-SuperSU-v1.99r3″ lalu pindahkan ke SDCARD (ditaruh di luar aja)
Shift+klik kanan pada folder extract tadi, Pilih “Open command window here”
Ketik adb devices (tanpa tanda kurung untuk memastikan HH terdetect di ADB)
Ketik adb reboot unlockbootloader (HH akan restart dan stuck di logo smartfren, biarkan saja)
Ketik fastboot devices untuk mengetahui apakah HH sudah terdetect di fastboot mode. jika sudah
Ketik fastboot boot recovery.img
HH akan masuk ke mode Recovery philp, lalu Flash file tadi dengan cara
Instal zip
Choose zip from /storage/sdcard0
pilih file super SU tadi.
Done!


Selamat Smartfren Andromax i3s kalian sudah ROOTED!





Beberapa kendala yang pernah ditemui:

Driver ADB belum terinstall/HH tidak terdeteksi oleh ADB
Solusi: Download dan Install driver ini
Saat boot recovery.img, muncul FAILED, too many bla bla bla
Terjadi karena HH terhubung melalui port USB 3.0 (biru), solusinya hubungkan HH melalui port USB 2.0 (hitam)
Terdapat 2 atau lebih perangkat yang terdeteksi
Solusi: pastikan tidak ada perangkat lain yang terhubung pada port USB, kecuali HH i3s.
Bila ada device bernama emulator itu biasanya karena di PC agan terinstall Bluestack, silahkan di uninstall terlebih dahulu, atau cari settingan di bluestack nya.


Source credit to Rendy Aditya ‘Cxl’ dan jangan lupa untuk donate ke Jujurs

Cara Mengatasi Andromax C2 yang Mati Total [MATOT]

Disini saya akan memberikan Tips & Trik pertolongan pertama untuk Smartfren Andromax C2 yang mengalami brick melalui app DiskGenius / partition guru.

Brick disini bukan bootloop, tapi mati total / cuma ada tanda-tanda getar, akibat salah format partisi atau ganti bootsplash. BackUp ini hampir seluruh partisi, kecuali Partisi System, userdata, cache & persist. Untuk partisi Unformatted (23) = partisi grow. Jika agan gak tau Nama partisinya, tinggal tambah 1 di Nomor Partisi di DiskGenius, Misal partisi Recovery(19), Nah urutan di Block aslinya No 20, yaitu mmcblk0p20.



Bahan :

BackUp partisi HH (DiskGenius)
Partition Guru Pro

Langkah-langkahnya :


  1. Install Partition Guru Pro nya di PC
  2. Buka Partition Guru Pro
  3. Matiin HH (kalau udah mati ya skip aja, hehehe)
  4. Cabut baterai
  5. Colok PC
  6. Tahan tombol Power + Volume Min
  7. Sampai muncul semua partisinya & jangan sekali-kali di Format
  8. Klik kanan pada partisi yang rusak / penyebab brick (lihat tabel di bawah post ini)
  9. Lalu restore
  10. Jika partisinya bisa di write kemungkinan bisa hidup (tapi ada sebagian partisi yang gak bisa di write)
  11. Jika udah selesai di restore, close app nya
  12. Lalu pilih save (harus pilih save)
  13. Cabut HH dari PC
  14. Tunggu beberapa saat lalu coba masukin batere
  15. Hidupkan



Tambahan : Kalau masih gak mau hidup


  • Masukin file TF di MMC (bisa baca di sini)
  • Lalu cabut baterai
  • Colok ke PC
  • kalau berhasil ada gambar batere disilang
  • Kalau ada gambar gitu coba, teken Tombol Power, Vol- , Vol+
  • nanti ada keterangan low Batt
  • Ulangi terus sampe bisa di TF



Tidak menutup kemungkinan Trik2 lain yg bisa anda coba sendiri.

Jika beruntung HH bisa sembuh, tp kalo gak bisa ya terpaksa ke Gallery Smartfren.




Source credit to Alhadi S’mbilan B’las



Daftar Tabel Partisi



lrwxrwxrwx root     root              1970-01-01 07:01 DDR -> /dev/block/mmcblk0p16
lrwxrwxrwx root     root              1970-01-01 07:01 aboot -> /dev/block/mmcblk0p3
lrwxrwxrwx root     root              1970-01-01 07:01 boot -> /dev/block/mmcblk0p17
lrwxrwxrwx root     root              1970-01-01 07:01 cache -> /dev/block/mmcblk0p19
lrwxrwxrwx root     root              1970-01-01 07:01 cdrom -> /dev/block/mmcblk0p14
lrwxrwxrwx root     root              1970-01-01 07:01 diag -> /dev/block/mmcblk0p12
lrwxrwxrwx root     root              1970-01-01 07:01 fsc -> /dev/block/mmcblk0p10
lrwxrwxrwx root     root              1970-01-01 07:01 fsg -> /dev/block/mmcblk0p21
lrwxrwxrwx root     root              1970-01-01 07:01 grow -> /dev/block/mmcblk0p24
lrwxrwxrwx root     root              1970-01-01 07:01 logo -> /dev/block/mmcblk0p13
lrwxrwxrwx root     root              1970-01-01 07:01 misc -> /dev/block/mmcblk0p9
lrwxrwxrwx root     root              1970-01-01 07:01 modem -> /dev/block/mmcblk0p15
lrwxrwxrwx root     root              1970-01-01 07:01 modemst1 -> /dev/block/mmcblk0p7
lrwxrwxrwx root     root              1970-01-01 07:01 modemst2 -> /dev/block/mmcblk0p8
lrwxrwxrwx root     root              1970-01-01 07:01 pad -> /dev/block/mmcblk0p6
lrwxrwxrwx root     root              1970-01-01 07:01 persist -> /dev/block/mmcblk0p18
lrwxrwxrwx root     root              1970-01-01 07:01 recovery -> /dev/block/mmcblk0p20
lrwxrwxrwx root     root              1970-01-01 07:01 rpm -> /dev/block/mmcblk0p4
lrwxrwxrwx root     root              1970-01-01 07:01 sbl1 -> /dev/block/mmcblk0p1
lrwxrwxrwx root     root              1970-01-01 07:01 sdi -> /dev/block/mmcblk0p2
lrwxrwxrwx root     root              1970-01-01 07:01 ssd -> /dev/block/mmcblk0p11
lrwxrwxrwx root     root              1970-01-01 07:01 system -> /dev/block/mmcblk0p22
lrwxrwxrwx root     root              1970-01-01 07:01 tz -> /dev/block/mmcblk0p5
lrwxrwxrwx root     root              1970-01-01 07:01 userdata -> /dev/block/mmcblk0p23

Source credit to Ipoet Kesepian

Cara Mengatasi Bootloop pada Andromax i3s

Bagi yang Andromax i3s nya stuck di logo smartfren saja/bootloop silahkan coba cara di bawah ini untuk mengembalikanny seperti normal.

Syarat:
  • Rooted
  • CWM Installed

Bahan Download :

via 4Shared


Caranya:


  1. Extract file yang tadi telah di download
  2. Copy folder hasil extract yang tadi ke sdcard/clockworkmod/backup/”disini”
  3. Masuk ke CWM
  4. Pilih Backup & Restore
  5. Pilih Restore



kalau berhasil WAJIB Wipe Data lagi via cwm agar tidak ada data saya yang ikut ke copy ke HH karena ini hanya copy-an dari StockROM saya.

Booting setelah restore sedikit agak lama, Don’t panic, it’s work. -Do With Your Own Risk ^^



Source credit by Febbie Dewanto

Cara Upgrade Kitkat di Andromax i3s

Akhirnya ada juga update official Kitkat untuk HH Smartfren Andromax i3s. Caranya pun cukup simple, mudah dan gampang. Penasaran? Cekibrooottt…

Bahan :


  1. Test.zip
  2. Verify.zip
  3. Recovery ORI i3s (khusus yang Andromax i3s nya sudah root dan terinstall CWM, bila belum, gak perlu)



Langkahnya :

Download & taruh semua bahan nya di SDcard (diluar saja tanpa folder)
Rename Recovery_sangat_ori.img jadi recovery.img (khusus yang i3s nya sudah di root, yang belum langsung ke step ke-6)
Buka Terminal Emulator (bila belum punya, download di PlayStore)
Ketikan su (enter)
Ketik dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p20 (enter)
Rename test.zip jadi update.zip
Buka System Upgrade
Klik pojok kanan atas yang kotak

Setelah Confirm Sure, nanti akan masuk recovery
Pilih update from sd card (pilih update.zip tadi)
Tunggu hingga selesai & reboot


Booting pertama kali sekitar 4-8 menit, sabar aja. semoga membantu.. :D



BACKUP DATA PENTING ANDA! Karena akan menghapus semua isi dari HH anda, kecuali yang di SDCard!



Source credit: to Rendy Aditya ‘Cxl’ & gan Bagus Alif Firmando

Cara Downgrade Andromax I3s dari Kitkat ke JellyBean

Banyak yang mengeluh, gimana cara balik ke JB. Nah ini dia yang namanya manusia, tidak suka bersyukur. Kemarin minta update ke Kitkat, giliran udah bisa, pengen balik ke JB #capedeh :p Makanya BUDAYAKAN BACKUP sebelum oprek, sebelum merengek-rengek kesana-kemari. Masak oprek-oprek sendiri, orang lain yang disalahin, gimana sih :p


PERSIAPAN :

-Rooted
-CWM Installed

Tutorial :

Pastikan ada Backup-an ROM JB di SDcard anda, tepatnya di sdcard/clockworkmod/backup/
Matikan HH nya
Masuk ke CWM, pencet TOMBOL POWER + VOL UP
Kalo udah masuk cwm -> Backup and Restore -> Restore from sdcard -> Pilih Backup-an tadi
Tunggu sampe selesai, kalo udah reboot
Bagi yang gak punya backup-an CWM, sukurin deh loe, makanya backup dulu sebelum oprek, enggak ding, gitu aja ngambek, mau nangis. Nih saya share Backup’an CWM milik Kama Adhitya Susanto :

Tutorial  :

Download Backupan CWM
Extract dulu
Copy/Cut folder hasil unzip yang tadi ke sdcard/clockworkmod/backup/“disini”
Restore via CWM
Kalau berhasil disarankan factory reset
Booting setelah restore sedikit agak lama (softbrick). Don’t panic, it’s work ^^
Do With Your Own Risk ^^

Photo Gallery: Pipo Pad-P8 tablet


Pipo Pad-P8 tablet specifications
● Display: 7.9",2048*1536 Retina   
● Touch panel: Capacitive 5-touch
● CPU: RK3288 Cortex A17, 1.8GHz, , with Mali T764 GPU
● RAM: 2GB LP DDR 2
● OS: Android 4.4
● Sensor: G-sensor
● Camera: Front 2M, back 8M auto focus, flashlight
● I/O ports: Micro SD slot, HDMI output, speaker, mic
● Wifi: 802.11b/g/n
● 3G built-in: optional. With UltraStick slot
● GPS built-in: Yes
● Bluetooth : Yes
● Battery capacity: 4000mAh*3.7V =14.8Wh
● Back housing material: metal+ plastic

Photo Gallery: Pipo Talk-T8 phablet


Pipo Talk-T8 phablet specifications
● Display: 6.44", 1920*1080 AHVA wide viewing angle
● Touch Panel: Capacitive  5-touch
● CPU: MTK 6592 Cortex A7 1.7GHz Octa-core CPU
● RAM: 2GB DDR3
● Operation System: Android 4.4
● Camera: Front 2M, back 13M auto focus, flashlight
● WiFi: 802.11a/b/g/n
● Internal 3G  built-in: yes, WCDMA+phone call
● Bluetooth 4.0: Yes

● Built-in GPS receiver
● Sensor: G-sensor, Gyro sensor, light sensor, e-compass
● Others: Micro SD slot, mic, speaker, MHL
● Housing material: plastic


Download Windows 8.1 drivers for Pipo W1, W2 & W3 Tablets


Download Windows 8.1 drivers for Pipo W1 from here, here or here.
Download Windows 8.1 drivers for Pipo W2 from here, here or here.
Download Windows 8.1 drivers for Pipo W3 from here, here or here.


Windows 8.1 drivers for Pipo W1 content:
- 3G driver  / UNA+_Driver
- EC_201407101A_w1_w3 / 201407101A.BIN
- G-sensor_20140204 / kxsensors-win8-x86-dbg-20140204-1.exe
- intel_W1
- WIFI_BT_20140626
- Biosēƒ§å½•ę–¹ę³•.doc 
- ECå†™å…„ę–¹ę³•.doc

Windows 8.1 drivers for Pipo W2 content:
- BIOS / I8080_MIPI_V3.1.5_FT_GC2235_OV5648_LogoPiPO.bin
- BT / RealtekBluetoothUartPackage_1.0.52.40714.L.zip
- camera8080
- EC_201407178A-w2 / 201407178A.BIN
- G-sensor8080 / kxsensors-win8-x86-dbg-20140320-emdoor-whck.exe
- intel_W2
- Wifi / 20140814 / RTLWlanS_WindowsDriver_3007.3.0715.2014_ISS_1.01.0243.Win8x.X86.L.zip
- Biosēƒ§å½•ę–¹ę³•.doc 
- ECå†™å…„ę–¹ę³•.doc
Windows 8.1 drivers for Pipo W3 content: 
- camera_8211
- EC_201407101A_w1_w3 / 201407101A.BIN
- G-sensor_20140204 / kxsensors-win8-x86-dbg-20140204-1.exe
- intel_W3
- WIFI_BT_20140626 / RealtekBluetoothUartPackage_1.0.41.40521 / RTLWlanS_WindowsDriver_3006.0.0320.2014_ISS_1.00.0237.L
- Biosēƒ§å½•ę–¹ę³•.doc 
- ECå†™å…„ę–¹ę³•.doc 
 

Download Android 4.2.2 Jelly Bean stock firmware for Ampe A62 3G tablet

 
Download Android 4.2.2 Jelly Bean stock firmware for Ampe A62 3G tablet from here or from here

Archive name: ampe A62 Dual core 3G  fw
Archive file size: 405 MB
Image file name: MT6582_jb5_m6201_3g_v1.0@2014-07-08_09-26(AMPE)
Platform: Mediatek MT6582
Project: newway82_tb_m730_jb5
Config_version: V1.1.1

Download Android 4.2.2 Jelly Bean stock firmware for TenGO GoTV Recording Box

 
Download Android 4.2.2 Jelly Bean stock firmware for TenGO GoTV Recording Box from here, here or from here

Archive name: FirmwareGoTV_OTA_V0801
Archive file size: 302 MB
Image file name: FirmwareGoTV_OTA_V0801.zip
Platform: Amlogic AML8726 MX Dual core
Build number: g18ref_th2-user 4.2.2 JDQ39 20140925.V0801 test-keys

Download Android KitKat 4.4.2 stock firmware for Jesurun CSM8 TV Box



Download Android KitKat 4.4.2 stock firmware for Jesurun CSM8 TV Box from here, here or here

Archive: CSM8 firmware SD  card
Firmware: Android KitKat 4.4.2
Image file name: k200-ota-20140801.zip
Model: Jesurun CSM8 TV Box
Image file size: 386 MB
Platform: Amlogic S802
Build number: k200-user 4.4.2 KOT49H 20140801 test-keys

BBM for Android Tampilan Windowsphone

BBM Windowsphone UI Credit by Trangga Ken


Nih yang mau tampilan BBMnya seperti tampilan di BBM for Windowsphone.
Langsung download di MARI
via Dropbox : LINK
via Google Doc: LINK

Credit: Trangga Ken


BBM Windowsphone UI Credit by Trangga Ken

Download Android 4.2.2 Jelly Bean stock firmware for iOcean X8 smartphone


 
Download Android 4.2.2 Jelly Bean stock firmware for iOcean X8 smartphone from here or from here. Download micro SD card update version from here or here. You can download KitKat 4.4.2 stock version from here.

Archive name: Iocean X8 MTK6592 firmware- 171267-20140922
Archive file size: 424 MB
Platform: Mediatek MT6592
Build number: S5-user 4.2.2 JDQ39 eng.scm.1400460632 test-keys
Project: vanzo92_wet_jb9
Config_version: V1.1.2 


Installation notes 
Step 1: Download the ROM and copy it to an external SD card root directory
Step 2: Shutdown the phone. 
Hold down Power button + volume up button to enter the recovery mode
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select X8-kk.zip
Step 4: Flash complete, restart the phone. Patience required – first boot takes a while.



Here you have a video tutorial on how to upgrade to KitKat another MT6592 CPU smartphone, E-ceros One

Download Nexus Root Toolkit 1.8.8



First of all just download Nexus Root Toolkit 1.8.8 from here, here or here. You can downlod previous version Nexus Root Toolkit 1.8.7 from here.


Unlocking, rooting, relocking and unrooting simplified! (and much more!)


VERSION 1.8.8  - This program will automatically bring together all the files you need to unlock and root your device in a few clicks, or flash it back to stock and re-lock it. You can also use this program to backup/restore all your important data, flash zips, set file permissions, push and pull files, install apps, generate logcats/bugreports, and much more! With the included file association options, you can perform tasks like flashing zips, installing apps, restoring android backup files, and flashing/booting img files with just a double click! The program includes a full featured interface for automating tasks in TWRP, enhanced restore features, an in-built auto-updater/notification system, ‘any build’ mode, advanced restore features,’NRT- Live Log’ for viewing the adb/fastboot cmds that are run in the background, quick tools utilities, and tools for taking screenshots/screen-recordings.   All the latest Android builds and Nexus devices are officially supported including the new Nexus 5, with full KitKat support for all the newly upgraded devices.  The program intelligently and selectively downloads the files it needs for your device and makes sure you are using the latest files available.  The program can even auto-detect your device and build.  The main changes in this release are full 4.4.4 support, improvements to the updater, and general code enhancements and optimizations.


Supported Nexus devices:
· Galaxy Nexus: GSM Models (both yakju and non-yakju builds)
· Galaxy Nexus: CDMA/LTE Verizon Models
· Galaxy Nexus: CDMA/LTE Sprint Models
· Nexus S: Worldwide, i9020t and i9023 Models
· Nexus S: 850MHz, i9020a Models
· Nexus S: Korea, m200 Models
· Nexus S 4G: d720 Models
· Nexus 7: Asus Tablet
· Nexus 7 3G: Asus Tablet
· Nexus 7 v2 (2013): Asus Tablet
· Nexus 7 v2 (2013) LTE: Asus Tablet
· Nexus 10: Samsung Tablet
· Nexus 4: LG Phone
· Nexus 5: LG Phone

Instructions:
1. Select the correct device and build (what you are currently running)
2. Configure your drivers if you haven’t already using the driver guide (If you aren’t sure use Step 3 of the driver guide to test your drivers).
3. If you need to, backup your important data.
4. Unlock your device
5. Root your device
6. Enjoy! ^_^
  • Learn more about each option by mousing over the control, dynamic tooltips will provide you more information, also each button displays a message about what it does first.
  • So the best way to get familiar with the toolkit is simply to press the buttons and read what it says.
What’s new in Nexus Root Toolkit 1.8.7: September 26th, 2014
· Revisions to perm-recovery-signed.zip to ensure it doesn’t interfere with root access if flashed after the SuperSU.zip
· Code fixes to advanced utilities > ‘push files’ script.

Download stock firmware for Q8 V41C tablet



Download stock firmware for Q8 V41C tablet from here or from here.

 
Firmware: Q8-V4IC-0309-0925
Model: Q8 V41C tablet
Image file size: 429 MB
Image file name: Q8-V4IC-0309-0925.img
Platform: Allwinner A13
Build number: nuclear_evb-eng 4.0.4 IMM76D 20120924 test-keys
FW version: 1.5
Resolution:  800 x 480 pixels
Company: softwinners
Style: SoftwinerEvb

Download Android KitKat 4.4.2 stock firmware for TV110 TV Box



Download Android KitKat 4.4.2 stock firmware for TV110 TV Box from here or here. Download previous version from here. Flash it using AMLogic USB Burning Tool v2.0.0.140306_Alpha like in this tutorial.



Archive: TV 110 firmware
Firmware: Android KitKat 4.4.2
Image file name: aml_upgrade_package.img
Model: TV110 TV Box
Image file size: 282 MB
Platform: Amlogic S805