Intex Aqua Star Pro Flash done in flash tool free download here

Intex Aqua Star Pro Flash done in flash tool free download here

Intex Aqua Star Pro easy to flash in this tutorial if you want to flash your device of Intex Aqua Star Pro just following this tutorial carefully, you can use this tutorial when your device pattern lock, screen lock, security code, restarting problem, hang on logo issue these problem in your device then your can use this tutorial easy to flash no any risk just insert usb cable you are done but remember some impotent notes for flashing first of check your micro usb cable because if any problem in micro usb cable you can't flash error like usb not recognize or other error and also check battery must your device battery charged up 80% if low your device battery then also error like usb not recognize so remember some impotent for flashing now let's go how to flash Intex Aqua Star Pro in Flash tool.

Download AREA 

Intex Aqua Star Pro SW.V.09 download here
BRCM_WinUSB_ADB_Jungo_MTP_RNDIS_Driver_1.05.rar download here
Brcm_MultiDownloader_201_UpdateOnly Download here

Require for Flashing:

1. Intex Aqua Star Pro device with battery charged
2. Intex Aqua Star Pro Firmware or Tool
3. Micro usb cable
4. Computer or Laptop

Procedure:

1. Download Intex Aqua Star Pro Firmware or tool from above link
2. Extract it in to Desktop or as you like path
3. Open Brcm_MultiDownloader_201_UpdateOnly folder
4. Open MultiDownloader.exe
5. Click on Setting Button and choose Configuration button (see below image)

6. Now click on firmware button and choose path of firmware then click on OK button and last click on Apply button (see below image)

7. Now Click on Start button
8. Press and hold Volume Up button and insert usb cable
9. Now your device detect with flash tool and you can see downloading process (see below image)

10. You are done from flashing if your device finished in flash then your can see like below image
0 Blog Comments
Tweets Comments
Facebook Comments

0 komentar:

Poskan Komentar