How To Flashing Samsung Galaxy S3 GT-I9300

Samsung Galaxy S3 GT-I9300 are currently often problematic, whether of software and hardware that often occurs due to negligence of the user. But most often find that damage from the software side. This is not because of factory defects that provide the software, but from the users who actually negligent and did not take the time to install the application or may be tweaked and could even install a custom rom because that is not as recommended. This is the cause of the Galaxy S3 GT-I9300 should do Flashing. For that I am making a way how to cope with the bootloop Galaxy S3 GT-I9300, error, or frequent restarts itself caused by its negligence.
  • Before Flashing
  1.  Usb Driver or samsung keis 
  2.  Odin v3.9  
  3. Firmware Galaxy GT-I9300
  • Tutorial
  1. Extrax firmware Galaxy S3 GT-I9300 to find files .md5
  2. Install samsung usb driver
  3. Go to the download mode by press and hold the Home button + Power + Vol.Down simultaneously.
  4. After entering the download mode. Galaxy S3 GT-I9300 Connect to PC / laptop with a USB cable.
  5.  Press the volume up on the galaxy ace3 to proceed
  6. Open Odin v3 and run the .exe
  7. Ensure ace3 galaxy has been detected on the PC. There will be a yellow column if it is detected.
  8.  If it is detected then check column PDA. Then click on PDA (PDA side which in check) then will be in order to enter fila .md5
  9. Klik START
  10. Wait until the process is complete (PASS) Galaxy ace3 the automatic restart. Finished
This Tutorial : How to Flashing Samsung Via Odin3

 
0 Blog Comments
Tweets Comments
Facebook Comments

0 komentar:

Posting Komentar