How To Flashing Samsung Galaxy S3 Mini GT-I8190


Samsung Galaxy S3 Mini GT-I8190 are currently often problematic, whether of software and hardware that often occurs due to negligence of the user. But most often find that damage from the software side. This is not because of factory defects that provide the software, but from the users who actually negligent and did not take the time to install the application or may be tweaked and could even install a custom rom because that is not as recommended. This is the cause of the Galaxy S3 Mini GT-I8190 should do Flashing. For that I am making a way how to cope with the bootloop Galaxy S3 Mini GT-I8190, error, or frequent restarts itself caused by its negligence.
  •     Before Flashing
  1. usb driver  or samsung keis
  2. Odin
  3. Firmware Galaxy S3 Mini GT-I8190
Tutorial:
  1. extrax firmware Galaxy S3 Mini GT-I8190 to find files .md5
  2. Install samsung usb driver.
  3. Go to the download mode by press and hold the Home button + Power + Vol.Down simultaneously.
  4. After entering the download mode. Ace3 galaxy Connect to PC / laptop with a USB cable.
  5. Press the volume up on the Galaxy S3 Mini GT-I8190 to proceed
  6. Open Odin v3 and run the .exe
  7. Ensure galaxy core has been detected on the PC. There will be a yellow column if it is detected.
  8. If it is detected then check column PDA. Then click on PDA (PDA side which in check) then will be in order to enter fila .md5
  9. Klik START
  10. Wait until the process is complete (PASS) Galaxy core the automatic restart. Finished

This Tutorial : How to Flashing Samsung Via Odin3
 
    • Good Lucky
    0 Blog Comments
    Tweets Comments
    Facebook Comments

    0 komentar:

    Poskan Komentar