Intex Cloud Y5 Flash done with volcano box 100% tested
Intex Y5 Flash done with volcano box 100% tested
Intex Y5 Model Image:
Download Area
 |
About This Tutorial:
This tutorial tested by me in Intex Cloud Y5 and this tutorial in that use Volcano tool because must need to flash boot driver and i try to boot from mobile but not detected boot driver in mobile from any key so Volcano tool is the use below are totally giving information how to connect Intex Cloud Y5 in the volcano box, how to flash Intex Cloud Y5 after connect volcano then flash in tool, and also here benefit you do not need a battery for your mobile phone to flash because it is to be connect with volcano box it is simple if you better understand this tutorial let's go how to flash Intex Cloud Y5 with volcano box.
Download Area
Intex Cloud Y5 Firmware or Tools Download
Procedure
1. Open volcano box and go to tab " Detect "
2. Select [D+/D-]SPD/Anyka
3. Click on Detect button
4. When complete driver search
5. Click on Set Pinout
6. Open Flash tools
7. Select file and click on firmware start button like play button
8. You are done
Success Flash Screen Shot
 |
- Modem Downloading check below image tutorial
 |
- System Downloading check below image
 |
- If your mobile will be flash done then you can see like below image tutorial
 |
- Now Click on Stop button and disconnect your device
- Then insert battery and start your mobile
- You are done
Categories:
Intex Cloud Y5,
Volcano tools with Flash
