koleksiromandroid

• Karbonn A9 Boot repair full source file
• Karbonn A9 with full battery charged
• Micro USBcable
• Computer or Laptop

Procedure:

• First download all files are required
• Extract QPST-2.7.399 zip file
• Open QPST-2.7.399 folder
• Click on " Setup " button (see below image tutorial)

• Visual C++ Runtime Libraries (x86) Click on Install button (if not understand following below image tutorial)

• Now go to Start Menu -> Program file -> QPST -> QPST Configuration Open it -> go to Pots tab -> Click on "Add New Port.." button see below image for more know about that

• Now Click on "USB/QC Diagnostic (Qualcomm HS-USB QDLoader 9008)" then OK button (see below image for more know about that)

• Now Go to Ports tab and check below image phone mode see below image

• Check below image for COM or driver need to boot repair must you have install below image driver

• Go to Start Menu -> Programs -> QPST -> eMMC Software Download open the tool -> Check program boot loaders and click on Browse for the device com port

•  Then Select port and press ok button (see below image tutorial)

• Now Tick Program Boot Loaders (if not tick), In flash programmer file name type MPRG8X25.hex->in Boot Image type 8X25_msimage.mbn after tick on NV Backup box and set SPC->000000 (if not tick or not set), Tick Trusted Mode (if not tick), Tick Prgram MMC Device (if not tick) see below image for more know about

• Click on Load XML def... button and browse for rawprogram0.xml Flare Revival Kit see below image

• Click on Load Patch def.. button and browse for patch0.xml see below image

• Check the search path 2 and click on browse button for the folder flare repair files see below image

• Now click on download button and wait until for download to finish (never it finish but it also detects a new driver, and that’s important) and it will search a new hardware found, install the driver see below image for more know about that

• Now you can update your phone to Firmware