koleksiromandroid

Samsung S5253 Flashing done with Flash tools (include with flash file or tool)

This device flash tested by me in flash tool in problem of hang on logo so when i below tested flash file with flash so it fine now running very well if you have this device and in that problem are screen lock, phone code, security code, hang on logo, restarting problem so you can use this tutorial because here all are tested but remember to everyone who use this tutorial first check hardware related problem because if hardware problem device you can't try to flash because may be your device will dead if hardware problem so please check first that and also you can't save your data like contacts, images, videos, calender etc data because this is factory reset file so please all are above warning check after use this tutorial and must your device battery charged this is impotent for  flashing because if stop between flash then also your device will dead or other problem so carefully use this tricks so let's go how to flash Samsung S5253 in flash tools also remember this is free not any charge for that and also you can use this tool without any box.

Download Samsung S5253 flash file tested from HERE

1. Samsung S5253 Device with battery charged

2. Samsung S5253 flash file with tested

3. Micro USB cable

4. Computer or Laptop

1. Download flash file or tool from above link

2. Extract to Desktop or as you wish to path

3. Open MultiLoader tool

4. Select BRCM1233

5. Click on Full Download box

1. First Click on Boot button and choose BOOTFILES folder

2. Click on Amss Button and choose apps_compressed.bin file

3. Click on Rscrs1 Button and choose Rsrc_S5253_Open_Arabic_Common.rc1 file

4. Click on Rscrs2 Button and choose Rsrc2_S5253_OpenArabic(Low).rc2 file

5. Click on Factory Fs Button and choose FactoryFs_S5253_Open_Arabic_Common.ffs file

6. Click on CSC Button and choose CSC_S5253_Open_Arabic_Common_OJPJJ2.csc file

7. Click on SHP APP Button and choose ShpApp.app file

8. Now Press and Hold Volume Down + Camera + Power Button from Device for Download Mode

9. Insert USB to device

10. Click on Port Search Button in to MultiLoader Tool

11. Then last Click on Download button

12. Wait until flash finish in to device

13. When your Device flashing done then device automatically restarting and wait until start properly

14. You are done :)